INLINE TUBE INL13129 Rear Gm Body Zinc Tail Pipe Hanger Ring Clamp Nosr

( Brand: Inline Tube ), ( Part Type: Pipe Ring Clamp ), ( Placement On Vehicle: Left, Right, Front, Rear ), ( Manufacturer Part Number: INL13129 ), ( Country/region Of Manufacture: United States ), ( California Prop 65 Warning: Warning, Birth Defects ), ( Or Other Reproductive Harm. For More Information Visit Https: //www.p65warnings.ca.gov/ ), ( Genuine Oem: Oem Replacement )

Review INLINE TUBE All Gm A body Silver Zinc Rear Tail Pipe Hanger Ring Clamp Clamps Nosr fits 1964-77

Introducing the Inline Tube Inl13129 Zinc Rear Tail Pipe Hanger Ring Clamp from NOS (New Old Stock). This is an authentic, original replacement part designed specifically for 1964 to 1977 GM A-Body vehicles. These clamps are essential for securing the rear tail pipe to the vehicle, ensuring proper exhaust function and maintaining the vehicle's aesthetic appeal.

The Inline Tube Inl13129 is made of zinc material, providing superior corrosion resistance compared to its steel counterparts. Zinc is an excellent choice for exhaust system components, as it can withstand the harsh conditions of under-the-vehicle exposure, including exposure to road salt, moisture, and extreme temperatures. This zinc construction also adds a classic touch to your vehicle, as it was a common material used in original GM parts during this era.

Each clamp measures approximately 1.5 inches in length, 1 inch in width, and 0.5 inches in height, allowing for a snug fit on most exhaust systems. The clamp features a ring design with an inner diameter of about 1.5 inches, which can accommodate various tail pipe diameters within the specified range.

The clamps are designed with a simple yet effective hanger system. They consist of two separate parts: the clamp body and the clamp ring. The clamp body has two threaded bolts that can be tightened to secure the clamp around the tail pipe. The clamp ring, on the other hand, is designed to slide over the tail pipe and is held in place by the clamp body once the bolts are tightened. This design allows for easy installation and removal when necessary.

Each clamp comes as a single unit, so you'll need to purchase two for a complete set to replace both sides of your vehicle's exhaust system. The Inline Tube Inl13129 Zinc Rear Tail Pipe Hanger Ring Clamp is a must-have for any GM A-Body enthusiast looking to maintain or restore their vehicle's exhaust system to its original condition.

These NOS clamps are an exact fit and come directly from the manufacturer's stock, ensuring their authenticity and high quality. By choosing NOS parts, you can trust that you're getting a genuine, original replacement part that will provide the same performance and durability as the original component on your vehicle.

Inline Tube Inl13129 1964-77 GM A-Body Rear Tail Pipe Hanger Ring Clamp Clamps: A Detailed Analysis

The Inline Tube Inl13129 1964-77 GM A-Body Rear Tail Pipe Hanger Ring Clamp Clamps are aftermarket parts designed to replace the original clamps on the rear tail pipes of certain GM A-Body vehicles manufactured between 1964 and 1977. These clamps are essential for securing the tail pipes to the vehicle and preventing excessive exhaust gas leakage. In this analysis, we will weigh the pros and cons of purchasing these clamps to help you make an informed decision.

1. OEM (Original Equipment Manufacturer) Replacement: These clamps are designed to be an exact fit for GM A-Body vehicles from 1964 to 1977, ensuring a perfect fit and function.

2. High-Quality Material: Made from zinc, these clamps are more durable than their OEM counterparts, which are often made from cheaper materials like iron or steel. Zinc is known for its resistance to corrosion and rust, making these clamps a long-lasting solution.

3. Easy Installation: These clamps can be installed relatively easily, requiring no special tools or extensive mechanical knowledge.

4. Affordable: Compared to the cost of purchasing new OEM clamps or having the old ones professionally repaired, aftermarket clamps like the Inline Tube Inl13129 are a more cost-effective option for most car owners.

1. Potential Quality Variations: Since these are aftermarket parts, there might be variations in quality among different manufacturers. It is essential to ensure that you purchase these clamps from a reputable supplier to minimize the risk of receiving subpar products.

2. Lack of Original Finish: These clamps do not have the original factory finish, which some car enthusiasts might prefer for maintaining the authenticity of their vehicles.

The Inline Tube Inl13129 1964-77 GM A-Body Rear Tail Pipe Hanger Ring Clamp Clamps offer several advantages, including their OEM fit, high-quality materials, easy installation, and affordability. However, there is a potential risk of quality variations among different manufacturers. To mitigate this risk, it is crucial to purchase these clamps from a reputable supplier. Ultimately, the decision to buy these clamps depends on your priorities as a car owner. If you value durability, ease of installation, and cost-effectiveness, then these aftermarket clamps are an excellent choice. If you prioritize the original factory finish, you might prefer to invest in OEM clamps or consider other options for preserving the authenticity of your vehicle.

If you're looking for a reliable, cost-effective solution to replace the tail pipe clamps on your GM A-Body vehicle from 1964 to 1977, the Inline Tube Inl13129 clamps are an excellent choice. Ensure that you purchase these clamps from a reputable supplier to guarantee their quality. If you prioritize the original factory finish above all else, you may want to consider other options, such as purchasing OEM clamps or investing in alternative methods for preserving the authenticity of your vehicle.

part # inl13129 prices

• $24.99-$74.99

specifications frazzlekits:

• for years: 1964-77
• brand: Inline Tube
• part type: Pipe Ring Clamp
• placement on vehicle: Left, Right, Front, Rear
• manufacturer part number: INL13129
• country/region of manufacture: United States
• california prop 65 warning: Warning, Birth Defects
• or other reproductive harm. for more information visit https: //www.p65warnings.ca.gov/
• genuine oem: Oem Replacement

general frazzlekits:

• Car Truck Parts Accessories > Exhaust Emission Systems > Exhaust System Kits
• condition: New

offer frazzlekits:

• availability: In Stock
• sold: 0
• options: Ship-to-home
• started: September 12, 2025

returns frazzlekits:

• policy: Returns Accepted
• time: 30 Days
• paid by: Seller

payments frazzlekits:

• other
• credit card: Discover
• wallet: Apple-pay

shipping frazzlekits:

• class: Standard
• transit: 4-7 Days
• type: Fixed
• service: Standard
• cost: $0.00

seller frazzlekits:

• rating: 99.1%
• # reviews: 280459

Inline Tube INL13129 Is Similar To:

• Inline Tube Jpt0001 Fits 2000-02 Jeep Wrangler Tj 6cyl 4.0l 3/8 Inch Trans Cooler Lines Oe Steel (29.7% similar) $96.00. (December 21st, 2024)
• Inline Tube Inl11088 1969 And 1971 Pontiac Gto 455 Ho Vacuum Hose Kit For Automatic Cars 3 Port (38.1% similar) $51.00. (January 25th, 2025)
• Inline Tube Inl10834 1964-72 Gm A Body Rear Tail Pipe Hangers Pair W- 31 And Non Cut Out Bumper 2pc (59.6% similar) $33.00–$68.00. (February 14th, 2025)
• Inline Tube Plx6911 1969 Pontiac Gto Judge Manual Transmission Extension Pipes And Chrome Tips Nos (46.7% similar) $36.95. (February 15th, 2025)
• Inline Tube Inl11853 1969-72 Chevelle Ss Rear Tail Pipe Chrome Cow Bell Tips Pair (57.8% similar) $96.00. (March 17th, 2025)
• Inline Tube Inl10844l 64-72 442 Gto Gs Chevelle Factory Sty Muffler Hanger Lt (44.3% similar) $119.95. (March 24th, 2025)
• Inline Tube Inl10844 1964-72 Gm A-body Muffler Hangers Right And Left With Hardware Pair (55.6% similar) $55.00. (March 24th, 2025)
• Inline Tube Inl11250 69-72 Oldsmobile Hurst Olds 442 W-30 Rallye 350 Trumpet Tail Pipe Chrome Tips (49.7% similar) $121.00. (April 4th, 2025)
• Inline Tube Inl11001 1960-72 Gm Exhaust Muffler Tail Pipe Hanger Clamp 2 1/4 Inch Phosphate With Bolt Pr (56.2% similar) $25.00. (April 11th, 2025)
• Inline Tube Inl11229 1970-71 Pontiac Gto Lemans Tempest Rear Tail Pipe Hanger Bracket Bolts Washers (61.6% similar) $20.00. (April 21st, 2025)
• Inline Tube Inl11081 Exhaust Tail Pipe Rear Hangers 1972 Chevrolet Chevelle 2pc (44.9% similar) $67.00. (June 9th, 2025)